| |
|
SOLAR ROAD STUDS
The solar road studs is are mainly use for road safety, traffic guidance and mark traffic hazards.
Solar road studs is perfect for signaling the existence of danger on highways, roads, curves, lines of demarcation of access, bike lanes and bus lines...
The extra bright flashing leds are extremely efficient at warning earlier than the normal road studs. Such advanced traffic management and road safety system give drivers enough time to react adequately in case of emergency.
During the day the solar road studs absorbs sunlight and charge it into electrical energy. During the night, it will them light without external power sources.
SOLAR ROAD STUDS X4-X6
|
|
Ideal solar road studs to signal the existence of risk in rounds, curves, pedestrian crossings, obstacles, definition of access lines, traffic lanes for bicycles and buses, hard lines of roads and highways. To oscure the solar road studs sing the direction to be followed by the flashing of increasing the road safely and traffic.
|
Technical characteristics:
- Innovative design in one piece, practical and current lines, which simplifies installation and improves impact resistance.
- Great visibility for your design with two visors.
- After a full charge the LED's can reach more than 200 hours work.
- At evening glow (flash giving the warning sign).
Two sizes to choose:
Little solar road stud: 108x100x23 mm.
- Orange solar road stud: Ref. BAS02TNA
- Red solar road stud: Ref. BAS02TRO
- White solar road stud: Ref. BAS02BLA
Big solar road stud: 148x121x30 mm.
- Orange solar road stud: Ref. BAS01TNA
- Red solar road stud: Ref. BAS01TRO
- White solar road stud: Ref. BAS01BLA
|
|
Big red solar road stud.
Ref. BAS01TRO
|
| |
 |
Big orange solar road stud.
Ref. BAS01TNA |
| |
 |
Big white solar road stud.
Ref. BAS01TBLA |
|
|
|
Little orange solar road stud.
Ref. BAS02TNA |
Little red solar road stud.
Ref. BAS02TRO |
Little white solar road stud. Ref. BAS02TBLA |
|
EMPO SOLAR ROAD STUDS
|
|
This solar studs can be use for road safety and other purposes. (exits of parkings, builbings, hotel lanes, decoration...)
Technical characteristics:
-
Designed for embedding in the ground with a resistance of 60 tons for heavy traffic.
-
As manufacturing according to customer needs and can choose 1,2 or 3 leds and colors of theses. (blue, red, amber, green or white)
-
Operation of LEDs flashing or fixed.
-
After a full charge the leds can reach 20 days.
-
Sizes: Ø 101mm x 22,5 mm
|
 |
|
Detail of a high tonnage truck passing over a Empo solar road studs.
|
Models: |
|
| - Solar road studs Blue Leds fixed. BASEM01FAZU |
| - Solar road studs White Leds fixed. BASEM01FBLA |
| - Solar road studs Orange Leds fixed. BASEM01FNAR |
| - Solar road studs Red Leds fixed. BASEM01FROJ |
| - Solar road studs Green Leds fixed. BASEM01FVER |
| - Solar road studs Blue Leds flashing. BASEM01IAZU |
| - Solar road studs White Leds flashing. BASEM01IBLA |
| - Solar road studs Orange Leds flashing. BASEM01INAR |
| - Solar road studs Red Leds flashing. BASEM01IROJ |
| - Solar road studs GreenLeds flashing. BASEM01IVER |
|
QUICK SOLAR ROAD STUDS |
|
This solar studs is ideal for decoration in pedestrian streets and buildings.
Technical characteristics:
-
Designed for embedding in the ground and wall.
-
Great visibility 1 led (blue, red, amber, green or white)
-
Operation of LEDs flashing or fixed.
-
After a full charge the leds can reach 20 days.
-
Sizes: Ø 84mm x 25 mm.
|
 |
|
LUMIN SOLAR ROAD STUDS
This solar studs is ideal for the Stopper plastic fence and flat pieces.
- Designed for the Stopper plastic fence.
- High visibility with 4 led amber.
- Operation of LEDs flashing.
Sizes: 95 x 50 mm x 22 mm
Ref: LSVPC
|
 |
|
|
Detail plastic solar light beacon set on the ADO Stopper plastic fence. |
UNDERRUN REFLEX REFLECTIVE WITH BEACONS
Reflective solar stud is perfect for signalinf the existence of risk in roundabouts, curves, road crossings, boundary lines of access, traffic lanes...
The reflective solar studs signal the direction of vehicles reflecting the light of these.
Sizes: 102 x 102 mm x 22 mm
Underrun Measure: 44 mm high x 10 mm wide
Ref: BNR01EM2C
|
|
Beacon reflective
(Top View) |
| |
|
Beacon reflective
(side view) |
COPA SOLAR ROAD STUDS
This solar studs whit is ideal for the Stopper plastic fence and flat pieces.
Technical characteristics:
- Designed for the Stopper plastic fence.
- As manufacturing according to customer needs and can choose optical omnidirectional 360º, bidirectional 180º or unidirectional 90º.
- Operation of LEDs flashing or fixed.
- After a full charge the leds can reach 25 days.
- Can Synchronize 16 units wirelessly (without lines).
- Remote synchronization.
|
 |
|
Sizes:
Height: 220 mm.
Width: 230 mm.
Weight: 2 kg. |
 |
 |
COPA solar roads studs installed in Sabadell Airport
|
Models:
Independent bi-directional solar road studs Amber or Red.
Independent bi-directional solar road studs Blue.
Independent solar road studs Green or White.
Blue road studs independent solar. |
Ref. BSIBAR
Ref. BSIBA
Ref. BSIVB
Ref. BSIA
|
Accessories:
| Anchorage Bionda |
|
Anchorage New Jersey |
|
Anchorage gate moved out |
|
Anchorage fence fixed |
|
Anchorage vertical sings |
 |
|
 |
 |
|
 |
|
 |
| Ref. SBAB |
|
Ref. SBAN |
Ref. SBAVT |
|
Ref. SBAVF |
|
Ref. SBASV |
| Anchorage rounds |
|
Remote control |
 |
|
 |
| Ref. SBAN |
|
Ref. MBALI
|
|
|
CONE WITH SOLAR ROAD STUDS
Cone built solar light beacon signal ideal for hazardous areas and low light, building sites, divisions of roads,...
Technical characteristics:
• Light: High intensity LEDs.
• Visibility: one, two or all directions.
• Autonomy: 50 days with bad weather.
• Mounting system: anti-theft, effective and safe.
• Materials: polycarbonate, polypropylene.
• Impact resistance, solar radiation, high and low temperatures..
Sizes: |
 |
 |
Little cone :
Diameter: 500 mm
Weight: 2,5 kg.
Ref. SBCP |
 |
Big cone :
Diameter: 750 mm
Weight: 3 kg.
Ref. SBCG |
|
Solar roads studs - solar beacon flashing - solar beacon fixed - reflective beacons |
|
